• Corrosion-resistant, powder-coated epoxy finish
• Stainless steel screws, switch arm, guard, and handle
• Watertight, neoprene square ring between motor and pump housing
• Solid, buoyant, polypropylene float
• Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
• Upper and lower sleeve bearings running in bath of oil
• Carbon and ceramic shaft seal
• Maximum temperature for effluent or dewatering: 130 °F (54 °C)
• Passes 1/2” (13 mm) spherical solids
• 1-1/2” NPT discharge
• On point: 7-1/4” (18 cm)
• Off point: 3” (8 cm)
• Watertight and dust-tight

Notes
The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps.

Reserve Powered Design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.