Home
Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!
X
290 Series Sewage Pumps
X
290 Series Sewage Pumps
Agricultural Pumps
Single and double seal submersible sewage or dewatering pumps.
Featured Video
-
Features & Benefits
- Durable, cast iron constructed switch case, base, motor and pump housing
- No sheet metal parts to rust or corrode
- All cast iron class 30 30000# tensile strength
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 Ph only) motor
- Maximum temperature for sewage or dewatering: 130 °F (54 °C) standard
- If over 130 °F (54 °C), consult factory.
- Shaft seal – stainless steel carbon and ceramic rotary
- 1117 carbon steel motor shaft (single seal models)
- Corrosion-resistant, powder coated epoxy finish
- Upper and lower ball bearing running in a bath of oil
- Neoprene square ring & gasket
- All models pass 2” (50 mm) spherical solids
- Major width (single seal): 12-7/8″ (32.7 cm)
- Major height (single seal): 19-5/16″ (49 cm)
- Automatic units available with float-operated, submersible, 2-pole mechanical switch
- On point: 15-3/4″ (40.0 cm)
- Off point: 5-1/4” (12.7 cm)
- Specify 2” or 3” NPT female flanged vertical discharge
- 100% computerized tested
- 1 year limited warranty
-
Product Specifications
Motor 1/2 – 2 HP Voltage 115 – 575 V Phase 1 or 3 Ph Hertz 60 Hz RPM 3450 RPM Type Permanent split capacitor or 3 phase Insulation Class B Amps 2.4 – 20.5 Amps Operation Automatic or nonautomatic Auto On / Off Points 15-3/4″ / 5″ (40.0 cm / 12.7 cm) Discharge Size 2″ or 3″ NPT Solids Handling 2″ (50 mm) spherical solids Cord Length 20′ (6 m) standard Cord Type UL listed, 3-wire neoprene cord and plug Max Head 75′ (22.9 m) Max Flow Rate 214 GPM (810 LPM) Max Operating Temperature 130 °F (54 °C) Cooling Oil filled Motor Protection Auto reset thermal overload (1 Ph) Cap Cast iron Motor Housing Cast iron Pump Housing Cast iron Base Cast iron Upper Bearing Ball bearing Lower Bearing Ball bearing Mechanical Seals Carbon and ceramic Impeller Type Non-clogging vortex Impeller Cast iron Hardware Stainless steel Motor Shaft 1117 carbon steel or 416 stainless steel* Gasket Neoprene square ring and gasket 
-
Literature
Technical Support Literature
- Technical Data, 290 SeriesFM2792: 60 Hz
- Installation Instructions, One-Year Warranty FM0447: 60 Hz
- Technical Specifications, Simplex Sewage/Sump FM0600: 60 Hz
- Technical Specifications, Duplex Sewage/Sump FM0615: 60 Hz
- Parts List, Model 292 (M, N, D, E, J, F, G, H, I, BA) FM0794: 60 Hz
- Parts List, Model 293 (F, G, BA, H, I, J, D, E) FM1652: 60 Hz
- Parts List, Model 294 (H, I, J, F, G, BA FM1588): 60 Hz
- Parts List, Model 294 (D, E) FM0647: 60 Hz
- Parts List, Model 295 (H, I, J, F, G, BA) FM1587: 60 Hz
- Parts List, Model 295 (D, E, WD, XE) FM0648: 60 Hz
Sales Literature
-
Design Tools
- Durable, cast iron constructed switch case, base, motor and pump housing
- No sheet metal parts to rust or corrode
- All cast iron class 30 30000# tensile strength
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 Ph only) motor
- Maximum temperature for sewage or dewatering: 130 °F (54 °C) standard
- If over 130 °F (54 °C), consult factory.
- Shaft seal – stainless steel carbon and ceramic rotary
- 1117 carbon steel motor shaft (single seal models)
- Corrosion-resistant, powder coated epoxy finish
- Upper and lower ball bearing running in a bath of oil
- Neoprene square ring & gasket
- All models pass 2” (50 mm) spherical solids
- Major width (single seal): 12-7/8″ (32.7 cm)
- Major height (single seal): 19-5/16″ (49 cm)
- Automatic units available with float-operated, submersible, 2-pole mechanical switch
- On point: 15-3/4″ (40.0 cm)
- Off point: 5-1/4” (12.7 cm)
- Specify 2” or 3” NPT female flanged vertical discharge
- 100% computerized tested
- 1 year limited warranty
| Motor | 1/2 – 2 HP | |
| Voltage | 115 – 575 V | |
| Phase | 1 or 3 Ph | |
| Hertz | 60 Hz | |
| RPM | 3450 RPM | |
| Type | Permanent split capacitor or 3 phase | |
| Insulation | Class B | |
| Amps | 2.4 – 20.5 Amps | |
| Operation | Automatic or nonautomatic | |
| Auto On / Off Points | 15-3/4″ / 5″ (40.0 cm / 12.7 cm) | |
| Discharge Size | 2″ or 3″ NPT | |
| Solids Handling | 2″ (50 mm) spherical solids | |
| Cord Length | 20′ (6 m) standard | |
| Cord Type | UL listed, 3-wire neoprene cord and plug | |
| Max Head | 75′ (22.9 m) | |
| Max Flow Rate | 214 GPM (810 LPM) | |
| Max Operating Temperature | 130 °F (54 °C) | |
| Cooling | Oil filled | |
| Motor Protection | Auto reset thermal overload (1 Ph) | |
| Cap | Cast iron | |
| Motor Housing | Cast iron | |
| Pump Housing | Cast iron | |
| Base | Cast iron | |
| Upper Bearing | Ball bearing | |
| Lower Bearing | Ball bearing | |
| Mechanical Seals | Carbon and ceramic | |
| Impeller Type | Non-clogging vortex | |
| Impeller | Cast iron | |
| Hardware | Stainless steel | |
| Motor Shaft | 1117 carbon steel or 416 stainless steel* | |
| Gasket | Neoprene square ring and gasket | |
|
|
||
Technical Support Literature
- Technical Data, 290 SeriesFM2792: 60 Hz
- Installation Instructions, One-Year Warranty FM0447: 60 Hz
- Technical Specifications, Simplex Sewage/Sump FM0600: 60 Hz
- Technical Specifications, Duplex Sewage/Sump FM0615: 60 Hz
- Parts List, Model 292 (M, N, D, E, J, F, G, H, I, BA) FM0794: 60 Hz
- Parts List, Model 293 (F, G, BA, H, I, J, D, E) FM1652: 60 Hz
- Parts List, Model 294 (H, I, J, F, G, BA FM1588): 60 Hz
- Parts List, Model 294 (D, E) FM0647: 60 Hz
- Parts List, Model 295 (H, I, J, F, G, BA) FM1587: 60 Hz
- Parts List, Model 295 (D, E, WD, XE) FM0648: 60 Hz
Sales Literature
-
Design Tools